DyNet
DyNet is the communications network and communications protocol for Dynalite lighting automation and building automation. It is now part of Philips Lighting.
Design
The network runs on a 4-twisted-pair cable of 100Ω 100 MHz CAT5E [permanent dead link] [1] or a flat cable with RS485 serial port, usually with a RJ-12 connector. A daisy-chain serial network topology is strongly recommended with no stubs. The recommended[1] cable colour-coding is:
Green/White pair = paralleled for GND
Orange/White pair = paralleled for +12V
Blue/White pair = blue for DATA+ and white for DATA-
Brown/White pair = spare or shield if unshielded cable is used.
References
- ^ "Search". Philips. Retrieved 2017-02-27.
- v
- t
- e
- AS-i
- BSAP
- CC-Link Industrial Networks
- CIP
- CAN bus
- CANopen
- DeviceNet
- ControlNet
- DF-1
- DirectNET
- EtherCAT
- Ethernet Global Data (EGD)
- Ethernet Powerlink
- EtherNet/IP
- Factory Instrumentation Protocol
- FINS
- FOUNDATION fieldbus
- GE SRTP
- HART Protocol
- Honeywell SDS
- HostLink
- INTERBUS
- IO-Link
- MECHATROLINK
- MelsecNet
- Modbus
- Optomux
- PieP
- PROFIBUS
- PROFINET
- RAPIEnet
- SERCOS interface
- SERCOS III
- Sinec H1
- SynqNet
- TTEthernet
This article relating to communication is a stub. You can help Wikipedia by expanding it. |
- v
- t
- e