Cantenna
A cantenna (a portmanteau blending the words can and antenna) is a homemade directional waveguide antenna, made out of an open-ended metal can.
Cantennas are typically used to increase the range (or discovery) of Wi-Fi networks.
Construction
The cylinder portion of the can may consist of metal-coated paperboard.
Although some designs are based on a Pringles potato chips can, this tube is too narrow to increase the 2.4 GHz signal by a useful amount,[1] although at 5 GHz it would be about the right size. However, a cantenna can be made from various cans or tubes of an appropriate diameter.[2] Some designs include a pole mount to elevate the cantenna.[3]
At 2.4 GHz, losses can occur if the cable from the cantenna to the Wi-Fi circuitry is too long. A more efficient cantenna can be made by minimising this length or connecting the cantenna directly to the Wi-Fi circuitry.[4]
Use
Cantennas are typically used for extending a wireless local area network (WLAN).
The tiny design makes them ideal for mobile applications such as wardriving.
Cantennas can be used to increase cell phone range,[5] improve reception, and decrease noise.
A cantenna can be used as a satellite dish feed horn. The 5.5 GHz cantenna dimensions are almost perfect in that they make a good fit for the standard TV satellite dish. The resulting setup is a low-cost high-quality high-gain antenna.[6] Such setups are widely used in wireless community networks for long-distance Wi-Fi links.
Cantennas may be used with other RF devices such as wireless security cameras.[7]
See also
- WokFi
- WarXing
References
- ^ "PC FAQ's: Build a 'Cantenna' Aerial". Archived from the original on 2008-04-11.
- ^ "Wlan antenna Waveguide type (includes table of suitable dimensions for cantenna)". Archived from the original on 2009-07-18.
- ^ "Cantenna build on a pole (includes construction plans)". Archived from the original on 2006-10-24.
- ^ "Episode 3 is On-The-Air – AmateurLogic.TV". 20 December 2005.
- ^ MAKE: Blog: Cell phone - Cantenna diagram and parts list
- ^ "How to make 5ghz cantenna - feeder for sat-dish - P Wiki MN". Archived from the original on 2016-10-29. Retrieved 2012-01-28.
- ^ "Cantenna.com User Guide" (PDF). Archived from the original (PDF) on 2021-03-01. Retrieved 2010-10-06.
External links
- Extend your wireless network by building a Wi-Fi cantenna
- Amateurlogic Episode 3 (Construction details for a more efficient cantenna)
- Waveguide Can-tenna
- Youtube video on How To Build A low loss Cantenna
- Cantenna Calculator
- v
- t
- e
- Isotropic radiator
- Batwing antenna
- Biconical antenna
- Cage aerial
- Coaxial antenna
- Crossed field antenna
- Dielectric resonator antenna
- Dipole antenna
- Discone antenna
- Folded unipole antenna
- Franklin antenna
- Ground-plane antenna
- G5RV antenna
- Halo antenna
- Helical antenna
- Inverted-F antenna
- Inverted vee antenna
- J-pole antenna
- Mast radiator
- Monopole antenna
- Random wire antenna
- Rubber ducky antenna
- Sloper antenna
- Turnstile antenna
- T2FD antenna
- T-antenna
- Umbrella antenna
- Whip antenna
- Adcock antenna
- AS-2259 Antenna
- AWX antenna
- Beverage antenna
- Cantenna
- Cassegrain antenna
- Choke ring antenna
- Collinear antenna array
- Conformal antenna
- Corner reflector antenna
- Curtain array
- Folded inverted conformal antenna
- Fractal antenna
- Gizmotchy
- Helical antenna
- Horn antenna
- Log-periodic antenna
- Loop antenna
- Microstrip antenna
- Moxon antenna
- Offset dish antenna
- Patch antenna
- Phased array
- Planar array
- Parabolic antenna
- Plasma antenna
- Quad antenna
- Reflective array antenna
- Regenerative loop antenna
- Rhombic antenna
- Sector antenna
- Short backfire antenna
- Slot antenna
- Sterba antenna
- Vivaldi antenna
- WokFi
- Yagi–Uda antenna